| Like any other machine, tanning beds are prone to | | | | should be replaced regularly as well. |
| rust, broken parts and all other forms of decay. Since | | | | The cleaning of a tanning bed should be two-fold. A |
| these devices are not cheap, keeping your bed in | | | | bed needs to be thoroughly cleaned once every few |
| good state should be a priority. This is not only about | | | | months, but it should also be treated after every |
| cleaning it after every use. It's about making sure all | | | | tanning session. Simply cleaning and disinfecting the |
| of the tanning bed parts work as they should! Stick | | | | surfaces goes a long way towards retaining the |
| to a regular maintenance schedule and your bed will | | | | quality of your device. However, make sure your |
| last for many years to come. Read on to find out | | | | cleaner does not contain any ammonia derivates, as |
| more about keeping your bed in tip-top shape! | | | | they may be harmful to the surfaces. The inside of |
| It is wise to set a time limit for yourself, so you | | | | the tanning unit does not need cleaning every time |
| know when the device is due for an inspection. Try | | | | you use it, but should not be neglected either. Dust |
| to check the tanning bed parts after they have been | | | | can enter through the fans and if it covers the |
| used for around 450 hours. Check the nuts, bolts and | | | | lamps, your tan will not be as good as one obtained |
| screws to make sure that they are secure. The | | | | from a clean machine. Wipe the lamps with a damp |
| areas you should pay special attention to are the | | | | cloth. |
| ones around the hinges, gas springs and other points | | | | If, upon inspecting of the tanning bed parts, you find |
| of movement. The malfunctioning of any of these | | | | that one of them is broken or malfunctioning, make |
| parts, specifically the gas springs, can result in a | | | | sure to contact the store where you purchased the |
| disaster. | | | | device immediately. Do not use the bed until a |
| Always make sure the vent holes and fan openings | | | | professional technician has taken a look at it. If the |
| are clear. If you have the time to clean the fan | | | | warranty for the bed has expired, any store that |
| blades, it is highly recommended that you do so at | | | | sells the particular brand you have should have the |
| every opportunity. Any air filters in the tanning bed | | | | parts you need. |