TGP Custom Installs CPR Systems High Spray Wand Phosphate With Wash Water Recycling For Clients

her it’s a new metal pretreatment cleaningSystems™ chemical cleaner / phosphate solution.
bay, or a conversion from your existing metalThe chemical balance and system pH is easily
surface preparation method, CPR Systems™ ischecked to determine the amount of chemical to be
ready to install a closed-loop metal pretreatmentadded. A simple log sheet is kept to record chemical
system to meet your specific needs. Cleanerusage.
Phosphoric Recycling Systems (CPR Systems™) aThe cleaning solution is circulated and continuously
division of T. George Podell & Co. is the leader incleaned using its proprietary clarifying technology.
high pressure spray wand phosphating with recycling.When it’s time to clean the metal substrate,
Since the company’s inception as a contractorthe operator switches “on” the Bondtite
in 1975, T. George Podell & Co, Inc hashigh-pressure phosphating unit. Pulling the wand trigger
developed into a corporation supplying specializedenergizes the high-pressure circuit and the gas burner
cleaning equipment, industrial cleaning services andautomatically ignites. This process is an energy
construction contracting to manufacturers acrossefficient “On-Demand” design. The heated and
North America. CPR Systems™ ability to combinepressurized solution is then sprayed on the work
over thirty five years of creative constructionpiece with an overlapping motion at pressures up to
know-how with the installation of equipment enables4,000 PSI, similar to spray painting. The wash water,
them to deliver on its promises. Quality, know-howchemical, and dirty / oily contaminants are all
and dependability we put it all together. These areautomatically collected in the sump basin(s) and
the reasons why CPR Systems™ is the premierpumped to the recycling system. The CPR
provider of metal pretreatment systems withSystem™ cleans the wastewater by removing the
recycling.oils / solids and other contaminants using separation,
CPR Systems™ work with you to develop a layoutfiltration, aeration, and other proprietary technologies.
for your new pretreatment bay and equipment thatThe cleaned and treated water / chemical solution is
will improve your production process and increasethen pumped to the high pressure phosphating unit
efficiency. Equipment installation usually takes oneto start the process all over again.
day, with start-up, testing and training completed onThe CPR System™ meets and exceeds the
the second day. Because the CPR System™ iscleaning effectiveness of a 5-stage washer in a
designed and built to your specific site, it is not limitedcompact size. This method of high pressure spray
by part size, weight, or production rate. The CPRwand phosphating will increase salt spray test times,
System™ equipment can be mounted on a platformalleviate corrosion, provide a 14 day no flash rust at
to save premium floor space or it can be located in50% humidity and save up to 80% over typical wash
another area of your plant if there is no roomand dump cleaning methods. Not convinced yet? CPR
adjacent to the wash bay.System's™ will clean, degrease and phosphate
The CPR recycling system collects the wash watermetal parts from your facility for you to bring to
from the wash bay or booth in collection sumps thenyour paint supplier for testing. They will video the
pumps the wash water through various separations,cleaning and send it you with the newly cleaned part.
filtration, aeration and other proprietary technologiesEmbarking or switching to the CPR high pressure
to clean the water and phosphate bath for reuse.metal pretreatment system will be one of the
How It works. The installed system is filled withsmartest business decisions you will ever make.
water and charged with PhosBite 101, the CPR