Types And Uses Of Steam Cleaners

Machines used for cleaning surfaces with hot waterMoisture content is only 6% in the vapor steam
are called steam cleaners. Steam cleaners are used tocleaner, so the surface will dry as soon as it is
kill allergens, bacteria, mold, and fungus on surfaces.cleaned. Any heat resistant surface can be washed
Steam cleaners are mostly used in homes, inns andby a vapor steam cleaner. It is generally used by
restaurants, etc. Home steam cleaners are used topeople who are allergic to chemicals.
clean surfaces such as in the bathroom, or the carpetThen there are steam cleaners made specifically to
and so on. A steam cleaner can be used to clean anyclean carpets. Instead of using steam, they use hot
surface which is heat resistant.water to clean the carpet. After wetting the carpet,
There are two types of steam cleaners; traditionalbrushes in the steamer scrub it, and unclean water is
steam cleaners, and vapor steam cleaners. Thesucked back into the container. The use of an air
traditional steam cleaners include a boiler, container,conditioner at the same time is good, as it eliminates
hose and brushes, and use warm water to make thehumidity from the air, and the carpet gets dried
surface clean. They are used to clean floors only. Thequickly. Once the carpet is dry, make sure that it is
warm water is spread on the dirty surface, and thenthen vacuumed so it is cleaned properly.
the revolving brushes scrub the surface and collectSteam cleaners can have an inbuilt water container or
the dirty water into a container. Some cleaners needthey can have a constant water supply. The latter is
cleaning agents to remove stains, but mostly rely onmore convenient, as you will not need to fill the tank
steam and brushes to perform this process.again and again.
Vapor steam cleaners include a container with aYou can get various models of steam cleaners.
heater, a hose and a nozzle. Water is boiled in theBefore purchasing, you should look for boiler capacity,
tank to produce dry steam. This dry steam is thrownits attachments, warranty and user manual etc. It is
onto the dirty surface via a hose and nozzle. Thealso important that you go through all the
steam helps in loosening the dirt and stains on themanufacture instructions before using your stream
surface. The surface is then cleaned with the help ofcleaner.
a vacuum cleaner.